You can access the distribution details by navigating to My Print Books(POD) > Distribution
Surveying-1 for civil engineering students, written unit by unit by a practising civil engineer: Chartered Engineer (India), PMP®, with 12+ years of industrial experience.
Every field procedure is explained in the order it is done on the ground and then written in the form you can reproduce in the exam. Every numerical is solved and cross-checked.
What's inside
- **Unit 1 – Fundamentals and chain surveying:** plane and geodetic surveying, classification, principles, plain, diagonal and shrunk scales, chains, tapes and ranging, chain survey stations and the field book, chaining on slopes, obstacles, errors and tape corrections (temperature, pull, sag, slope, MSL) and normal tension.
- **Unit 2 – Compass surveying, plane tabling and minor instruments:** WCB and QB, prismatic and surveyor's compass, declination, dip and local attraction, compass traversing, closing error, Bowditch and transit adjustment, plane-table methods, the two- and three-point problems, and the clinometer, ghat tracer, hypsometer, pantagraph and box sextant.
- **Unit 3 – Levelling, contouring, areas and volumes:** datum and bench marks, levels and staffs, temporary and permanent adjustments, the two-peg test, HI and rise-and-fall booking, reciprocal levelling, curvature and refraction, contours and their uses, the trapezoidal and Simpson's rules, coordinates, DMD and the planimeter, end-area and prismoidal volumes, borrow pits and reservoir capacity.
- **Unit 4 – Theodolite, tacheometry and modern instruments:** the transit theodolite and its adjustments, repetition and reiteration, theodolite traverses and omitted measurements, stadia, tangential and subtense-bar tacheometry, trigonometric levelling, EDM and the total station, with an introduction to GNSS, laser scanning and drones.
In every unit
- 30 solved examples (120 in total)
- A 20-question practice set
- Four model 10-mark answers
- 40 MCQs in the style of GATE, ESE and AE/JE papers, with an answer key (160 in total)
- An exam question bank
- A one-page formula sheet and a last-night revision sheet
Hinglish "Samjho aise" boxes explain the hard ideas. Site notes by the author show how surveying is used on real projects: referencing stations, tape temperature on column grids, local attraction near steel, TBMs before excavation, level-book checks, centring the total station and checking every stake-out point.
Suitable for B.Tech/BE civil engineering students, and for GATE, ESE and state AE/JE aspirants.
Currently there are no reviews available for this book.
Be the first one to write a review for the book Surveying-1.